Geo 5 Full Crack Software
A general framework of hydro-mechanical-chemical coupling model is proposed for geomaterial subjected to the dual effects of mechanical loading and chemical degradation. Mechanical damage due to microcracks in solid matrix and chemical damage induced by the increase of porosity due to dissolution of matrix minerals as well as their interactions are considered. A special model is proposed for sandstone. The reaction rate is formulated within the framework of mineral reaction kinetics and can thus take into account different dissolution mechanisms of three main mineral compositions under different pH values. The increase of porosity is physically defined by the dissolution of mineral composition and the chemical damage is related to the increase of porosity. The mechanical behavior is characterized by unified plastic damage and viscoplastic damage modeling. The effective stress is used for describing the effect of pore pressure. The elastic parameters and plastic evolution as well as viscoplastic evolution are dependent on chemical damage. The advection, which is coupled with mechanical damage and chemical damage, is considered as the dominant mechanism of mass transfer. The application of model proposed is from decoupled experiments to fully coupled experiment. The model offers a convenient approach to describing the hydro-mechanical-chemical coupled behavior of geomaterial.
Geo 5 Full Crack Software
Geological CO2 sequestration, also known as CO2 geo-sequestration, is a process to mitigate CO2 emission into the earth atmosphere in an attempt to reduce the likely greenhouse effect. It involves injection of carbon dioxide, normally in a supercritical state, into a carefully selected underground formation. Selection of an appropriate geological formation for CO2 geo-sequestration requires a good knowledge of the involved processes and phenomena that occur at the subsurface, and in particular, an estimate of the amount of leakage that might take place in time. Modeling leakage of CO2 in a deformable porous medium constitutes the focal point of this thesis.To this aim, a computationally efficient multiphysics multidomain multiphase numerical modeling framework has been developed which accounts for all important physical processes, interacting domains, and different material phases. The computational efficiency is achieved via tailoring several state of the art numerical techniques in order to attain an accurate, geometry-independent, and mesh-independent model. Deriving such a model for thermo-hydrodynamic-mechanical behavior of a multiphase domain, exhibiting deformation and crack propagation requires a well-designed conceptual model, a descriptive mathematical formulation and an innovative numerical method. The conceptual model distinguishes different domains representing a porous matrix domain, an abandoned wellbore domain, a fracture domain and a fracture-matrix domain. The mathematical formulation adopts the representative elementary volume (REV) averaging based conservation equations for porous media, the drift-flux model averaging of Navier-Stokes equations for the wellbore and fracture domains, and equations of state and constitutive relationships for the involved brine, CO2, air, and solid phases. The numerical solution method adopts a mixed discretization scheme, in which, the standard Galerkin finite element method (SG), the partition of unity finite element method (PUM) within the framework of the extended finite element method (XFEM), and the level-set method (LS) are tailored together to obtain an accurate, geometry-independent, and mesh-independent solution. The thesis introduces four computational models. The first model deals with CO2 leakage via formation layer boundaries, which is capable of simulating multiphase flow in rigid heterogeneous layered porous media, with particular emphasis on the inter-layer leakage of CO2. This model is presented in Chapter 2. The second model deals with CO2 leakage via abandoned wellbores, which is capable of simulating all important physical phenomena and processes occurring along the wellbore path, including fluid dynamics, buoyancy, phase change, compressibility, thermal interaction, wall friction and slip between phases, together with a jump in density and enthalpy between the air and the CO2. This model is presented in Chapter 3. The third model introduces the integration of the first and second models to create an integrated wellbore-reservoir numerical tool for the simulation of sequestrated CO2 multi-path leakage through formation layers and abandoned wellbores. This model is presented in Chapter 4. Finally, the fourth model deals with fracturing and CO2 leakage through cracks. It presents a fully coupled thermo-hydrodynamic-mechanical computational model for multiphase flow in a deformable and fracturing porous media. This model is presented in Chapter 5. These four models cover all important CO2 sequestration processes and leakage mechanisms which might occur in a CO2 geo-sequestration site. The numerical examples show that the proposed computational model, despite the relatively large number of degrees of freedom of different physical nature per node, is computationally efficient. Physically, the numerical examples show that for the normal initial and boundary conditions encountered in CO2 geo-sequestration, leakage via abandoned wellbores and leakage via formation layers can be equally important. Deformation and fracturing, together with leakage via the fractures seem, following the studied cases, a secondary concern. Although the leakage via abandoned wellbores and the leakage via formation layers appear to be equally important in terms of the quantity of leaked CO2, the leakage through the wellbore comes with a greater risk because it can rapidly reach the ground surface. The results of leakage via the fractures show that, in case of having a relatively less permeable cap-rock, the risk of leakage via the fractures increases.The proposed computational models presented in this thesis can be utilized as a framework for the development of efficient and comprehensive numerical software, in such a way that engineers can carry out realistic simulations on relatively limited hardware resources and CPU time. This is due to the computational efficiency of the proposed mixed discretization scheme. Further extensions of this work include: tailoring to other applications, improvement of the constitutive relationships of the solid phase, adding crack initiation and velocity, and adding dynamic forces effects to the solid medium in order to account for the seismic forces.
Volcanic activity reported here is preliminary and subject to change. Carefully reviewed, detailed narratives over longer time periods are published as reports of the Bulletin of the Global Volcanism Network available through volcano profile pages.
A Google Earth network link for the Weekly Volcanic Activity Report can be loaded into the free Google Earth software, and in turn will load placemarks for volcanoes in the current weekly report. Placemark balloons include the volcano name, report date, report text, sources, and links back to the GVP volcano profile page and to the complete Weekly Report for that week. This feature was first made available on 1 April 2009.
1. The Weekly Volcanic Activity Report is intended to provide timely information about global volcanism on a weekly basis. Consequently, the report is generated rapidly by summarizing volcanic reports from various sources, with little time for fact checking. The accuracy of the Weekly Volcanic Activity Report is dependent upon the quality of the volcanic activity reports we receive. Reports published in the Bulletin of the Global Volcanism Network are cover longer time periods and are more carefully reviewed, although all of the volcanoes discussed in the Weekly Volcanic Activity Report are not necessarily reported in the Bulletin. Because of our emphasis on rapid reporting on the web we have avoided diacritical marks. Reports are updated on the Weekly Volcanic Activity Report web page as they are received, therefore information may be included regarding events that occurred before the current report period.
For site security purposes and to ensure that this service remains available to all users, this government computer system employs software programs to monitor network traffic to identify unauthorized attempts to upload or change information, or otherwise cause damage. Unauthorized attempts to upload information or change information on this website are strictly prohibited and may be punishable under the Computer Fraud and Abuse Act of 1986 and the National Information Infrastructure Protection Act. Information may also be used for authorized law enforcement investigations. (Last modified September 21, 1999.)